JBL Control 29AV-1 Indoor/Outdoor Loudspeaker

JBL Control 29AV-1 Indoor/Outdoor Loudspeaker

56,592.00 Price excluding tax

Key Features:

• Extremely smooth, flat frequency response with extended bandwidth
• 110° x 85° HF coverage, rotatable horn
• 110 Watt transformer for 70V or 100V lines, with 8Ω thru
• SonicGuard™ overload protection
• 200 mm (8”) Kevlar cone woofer, 25 mm (1”) titanium diaphragm
compression driver
• Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment
points for suspension and optional U-bracket
• Sealed input panel cover and screw-down input terminals

Compare

Description

JBL Control 29AV-1 8″ 2-Way 300W Indoor/Outdoor Loudspeaker

Description:

The JBL Control 29AV-1 provides improved voicing for extremely flat, high-fidelity performance, extended bandwidth, and well-controlled defined coverage from a compact loudspeaker.

The rotatable high-frequency horn allows the use of the speaker in either vertical or horizontal orientation. Consistent coverage ensures excellent sound character throughout the listening area. Moderate magnetic shielding allows the use of the speaker as close as 230 mm (9) to video monitors.

The top-quality line distribution transformer, designed for minimal insertion loss and reduced saturation, allows the use of either 70V or 100V distributed speaker lines. In the bypass position, the 8Ω impedance allows the use of multiple speakers on a loudspeaker line.

The included InvisiBall mounting method is simple to install, aims easily, and provides a high degree of theft deterrence. Invisible allows horizontal rotation of up to 41° off-axis and vertical rotation of up to 36° (horn end inward) or 23° (woofer end inward). Attachment points for the optional MTC-29UB U-bracket allow for compact installation.

Weather resistance has been maximized. The woofer’s cone is made of kevlar, the surround is pure butyl rubber, and the driver basket is rear loaded to minimize direct exposure.

The compression driver’s diaphragm is pure titanium. The grille is thermoset composite coated and comes with foam to minimize incursion of water. Nickel/zinc rust-resistant terminals ensure a secure input connection. An MTC-PC2 sealed entrance cover is included to further protect the speaker’s terminals.

JBL’s exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full-fidelity sound.

Available in black or white (-WH). The cabinet will accept a variety of paints to match any décor.

Click Here Know For Best Microphone Products

SPECIFICATION

 

System

Frequency Range (-10 dB)1: 37 Hz –18 kHz
Frequency Response (± 3dB)1: 43 Hz – 15 kHz
100 Hr Power Capacity2: 300 Watts Continuous Program Power
150 Watts Continuous Pink Noise
Maximum SPL @ 1m3: Short-Term: 118 dB; Long-Term: 112 dB
Nominal Sensitivity4: 90 dB, 1W @ 1 m (3.3 ft)
Nominal Coverage Angle5: 110° H x 85° V, rotatable
Directivity Factor (Q): 6.7, averaged 500 Hz to 16 kHz
Directivity Index (DI): 8.3 dB, averaged 500 Hz to 16 kHz
Nominal Impedance: 8 ohms
Minimum Impedance: 6.3 ohms @ 230 Hz 3.3 ohms @ 4.1 kHz
Crossover Type: 3rd order high-pass, 2nd order low-pass with impedance compensation, 2.5 kHz crossover frequency
Transformer Taps: 70V: 110W, 55W, 28W & 14W
100V: 110W, 55W, & 28W
Thru Position: 8Ω nominal

Transducers

Low Frequency: 200 mm (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voice coil on fiberglass former
High Frequency: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround

Physical

Enclosure Material: High impact polystyrene
Grille: Thermoset composite-coated steel
Overload Protection: Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during extreme overload conditions.
Environmental: IEC 529 IP-X4 splashproof rating. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray
Termination: Screw-down terminal strip, zinc-plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8, or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
Safety Agency Rating: The transformer is listed per UL1876
Colors: Black or white (-WH)
Dimensions (H x W x D): 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in)
Net Weight (each): 12.2 kg (26.8 lb)
Shipping Weight (each): 14.0 kg (30.8 lb)
Included Accessories: » 1 pc MTC-PC2 input panel cover, invisible mounting base, 6 mm x 260 mm InvisiBall He wrench
Optional Accessories: »MTC-29CM to install speaker down from the ceiling
»MTC-29UB U-bracket

Click Here Know For Best Microphone Products

Reviews

There are no reviews yet.

Be the first to review “JBL Control 29AV-1 Indoor/Outdoor Loudspeaker”

Your email address will not be published. Required fields are marked *