Bosch Condenser Handheld Microphone

Bosch Condenser Handheld Microphone

9,720.00 Price excluding tax



LBB 9600/20 Condenser Handheld Microphone

  • Condenser transducer
  • Unidirectional
  • High speech intelligibility
  • Low sensitivity to case noise and vibrations
  • Phantom powered

This condenser microphone is based on an electric transducer element in a sturdy housing with shielding against wind and wind bursts (pops). It is intended for public address and sound reinforcement applications, such as in churches, theaters, and conference centers.


The handheld LBB 9600/20 is an excellent microphone with almost frequency independent, unidirectional directivity. Its low equivalent input noise level and insensitivity to stray electrostatic and electromagnetic fields keep the audio signal free from spurious noise.
The microphone has an on/off slide-switch and a 3‑pin, lockable XLR plug. It uses a phantom power supply, which is available on all microphone inputs on Bosch public address amplifiers.                                                                                                                                              It comes with a push-on clip with a Whitworththreaded screw fitting, and a multi-thread adaptor (3/8″, ½”, and 5/8″) for mounting. The supplied 7 m (23 ft) connection cable has 3‑pin, lockable male and female XLR connectors.


A number of accessories, such as extension cables, table stands and floor stands are also available. See the separate microphone accessories data sheet.

Technical specifications


Phantom power supply
Voltage range 11                      V to 52 V (acc. to DIN 45596 and IEC 268-15A)
Current consumption        <1.5 mA


Polar pattern Unidirectional
Frequency range                            100 Hz to 16 kHz
Sensitivity                                         2 mV/Pa +/-‑3 dB(-54 dB rel. to 1 V/Pa)
Rated output impedance           200 ohm
Equivalent input noise level    26 dB (A)
* Technical performance data acc. to IEC 60268-4


Dimensions                                   (D x L) 54 x 170 mm (2.13 x 6.69 in)
Weight                                             245 g (8.64 oz)
Color                                                Black
Switch                                             On/off slide
Cable type Cable length          7 m (23 ft)
Connector                                     3‑pin XLR (male)


Operating temperature            -20 °C to +55 °C (-4 °F to +131 °F)
Storage temperature                 -40 °C to +70 °C (-40 °F to +158 °F)
Relative humidity                       <95%

Ordering information

LBB 9600/20 Condenser Handheld Microphone Condenser hand-held microphone, unidirectional, matt-black finish, on/off switch, supplied with 7 m (23 ft) cable, 3-pin lockable male and female XLR connectors. Order number LBB9600/20
LBC 1221/01 Floor StandMicrophone floor stand, three folding legs, matt black,adjustable length from 850 to 1600 mm(2.79 to 5.25 ft) with twist clamp, threaded connector3/8″ Whitworth.
Order number LBC1221/01

LBC 1226/01 Adjustable Boom
Microphone boom arm, matt black, maximum reach 670 mm (2.12 ft), length 840 mm (2.76 ft), fits onto 3/8′ Whitworth threaded microphone stands. Order number LBC1226/01
LBC 1227/01 Table Stand
Table microphone stand, matt black, heavy round castiron base, 130 mm (5.12 in) diameter with shockabsorbing rubber insert under surface, with 3/8” Whitworth stud. Order number LBC1227/01

Click Here To Know More Products Of  Microphone


There are no reviews yet.

Be the first to review “Bosch Condenser Handheld Microphone”

Your email address will not be published. Required fields are marked *