Ahuja APA 480 Power Amplifiers | 600 Watts

Ahuja APA 480 Power Amplifiers | 600 Watts

32,580.00 Price excluding tax

APA-480

600 WATTS

Installation PA Power Amplifier

  • 1x Line 200mV unbalanced input and 2x Line 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs.
  • 100V input is provided for connecting another amplifier’s output in long-line applications.
  • Ground lift switch provided at rear panel which helps reduce the hum that occurs due to multiple ground loops in the installations.
Compare

Description

Ahuja APA 480 Power Amplifiers

INSTALLATION PA POWER AMPLIFIERS

  • 1x Line 200mV unbalanced input and 2x Line 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs.
  • 100V input is provided for connecting another amplifier’s output in long-line applications.
  • Ground lift switch provided at rear panel which helps reduce the hum that occurs due to multiple ground loops in the installations.
  • Resettable circuit breaker for protection against overload and short circuits.
  • Loop through output for connecting another booster amplifier.
  • 19” Rack mountable chassis.
  • Instant transfer to DC power (Car Battery) if AC power fails.

SPECIFICATIONS

Power Output 750W Max., 600W RMS at 10% THD, 550W RMS at 5% THD, 500W RMS at 2% THD, 480W RMS at 1% THD
Output Regulation ≤ 2 dB, no load to full load at 1kHz
Input Channels 1 × 200mV/470kΩ (unbal.), 2 × 1V/50kΩ (bal.), 1 × 100V Input/50kΩ
Frequency Response 50-15,000Hz ±3dB
Signal-to-Noise Ratio 60dB
Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs Loop through 1 × 200mV/600W, 2 ×1V/1kW
Speaker Outputs 4Ω, 8Ω, 70V & 100V
Power Supply AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption AC: 1200VA DC: 15A
Dimensions W485 × H142 × D510 mm
Weight 32.20kg

Reviews

There are no reviews yet.

Be the first to review “Ahuja APA 480 Power Amplifiers | 600 Watts”

Your email address will not be published. Required fields are marked *